CreatBot F430


Tax included


We are the first one to publish 420°C high temperature nozzle to 3d printer market since year of 2016, now it is the 4th new tech version.
F430 equiped with dual extruders, The left 260°C hotend is able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. The right 420°C hotend is made of martensite steel, which is able to print High performance material like PEEK, ULTEM, etc.
The dual hotend is replaceable, which provide more possibility on your application.

420 ℃ Hotend

Direct Drive

High Precision & High Speed

We exclusively research and develop the extruder feeding system and guide rail, which support high-speed printing. Its printing accuracy can reach high to 0.04mm,and it allows to extrude filament steady without block.

High Precision

Precision up to: 0.04 mm

Speed up to: 120 mm/s


The whole-steel body not only ensure the stability when printing, but also extend the usage period greatly. Its optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3D printers have been working for 9 years and more than 30,000 hours.

Metal Chassis

Fully Enclosed+Hot Chamber 70°C

-Fully enclosed chamber can block all external interfernce and reduce noise.
-Hot chamber device provide constant room temperature 70°C,which is able to prevent prints from warping and deform.

Fully Enclosed

Hot Air System

Outage Restored & Filament Detection

The printer will automatically memorize the current position and save print data.
Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power’s on.
The printer will avoid invalid printing by stoping print and warning when filament runs out.

Outage Restored

Filament Detection

Touch Screen

-The printer have all-english-menu touch screen which is easy - -Operate and friendly use. One key to warm,one key to print as well as many other shortcut keys.

Touch Screen


Glass-Ceramic Platform + Carbon Fiber Sheet

The printer has a heatable glass-ceramic platform and a carbon fiber sheet coverd.
Glass-ceramic have hight thermal efficiency and best low-expansion coefficient, so it don't deform when heating&cooling.
-Carbon fiber sheet is tough and removable. Heat can be deliver efficiently. Most materials can be extruded and sticked to bed very well.

Air Filter System

The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space.

Air Filter System

Automatic Leveling Platform

BLtouch smart version use of 25 points, use of 25 points through the probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.

Automatic Leveling

Glass Ceramic


Technical Specs:

PrintingPrint TechnologyFused Deposition Modeling(FDM)Build Volume400*300*300 mmNumber of NozzlesDoubleResolution0.04 mmLayer Resolution0.02 mmFilament Diameter1.75 mmFilament CompatibilityPLA, ABS, Carbon Fiber, Wood, Nylon, PC, PTEG, HIPS, PP, Flexible, TPU, PVA, PEEK, etc.Nozzle Diameter0.4mm (0.3 0.5 0.6 0.8 1.0mm)Print File TypeSTL, OBJ, AMF, GcodeSpeedBest Printing speed55 mm/sMax. Printing speed180 mm/sElectricalPower Requirements100-240V, 50-60HzMax. Power1 500 WScreen4.3'' Touch ScreenControl ChipATmega 2560Storage MediaU DiskConnectivityUSBSpecial FunctionOutage RestoredSave data when power is offFilament DetectionPause printing when filament run outAutomatic Shut-downTurn off the power automatically when printing is complete

TemperatureAmbient Operating Temperature15 ℃~32 ℃Max. Nozzle Temperature420 ℃Max. Bed Temperature140 ℃Max. Chamber Temperature70 ℃MechanicalConstructionPower-Coated Steel, Aluminum Casting for Motion ComponentsBuild PlateGlass Ceramic PanelBuild Plate LevelingAutomaticExtruderDirectly DriveStepper Motors1.8° Step Angle with 1/16 Micro-steppingX Y Positioning Precision12.7 μmZ Positioning Precision1.25 μmSoftwareSoftware BundleCreatWare, Simplify 3D, Cura, Slice 3r, etcSupported File TypesSTL,OBJ,AMFOperating SystemsWin7/8/10, MacOSSize & WeightProduct Dimensions & Weight620*485*680 mm 48 kgPacking Size & Weight750*580*720 mm 62 kg

Payment & Security

American Express Apple Pay Google Pay Maestro Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed